aquajet
Dec 6, 01:28 PM
If you do decide to swap out the logicboard from a newer/faster iMac, keep in mind there are two 500mhz boards out there...the DV SE which has the older 8mb Rage chip and the later models which have the 16mb chip. I'd look for a 600 or 700mhz board to be safe.
Poff
Jan 25, 03:21 AM
aaand a short question..: :)
How does it work with audiobooks?
Say I listen to an audiobook, can I swich and listen to another song for a while, and then return to the audiobook and start where I last stopped? Or do I have to listen to the whole book at once?
How does it work with audiobooks?
Say I listen to an audiobook, can I swich and listen to another song for a while, and then return to the audiobook and start where I last stopped? Or do I have to listen to the whole book at once?
Tiptizzle
May 5, 12:47 PM
So then it wouldn't matter if they could or not?
Well, do they hurry home and try to do it? Or just forget about making an extra trip home since it can't be done anyway?
Well, do they hurry home and try to do it? Or just forget about making an extra trip home since it can't be done anyway?
wuntrikpony
Jan 5, 12:41 AM
Why is everyone getting so down on the trailer? It's a fun little video made by people who have a great online community. It's not supposed to be serious or serve an immediate function(other than creating some hype). Is that really so wrong? I mean it's one thing if you just don't think the trailer was done well, but why put down some people having fun? And I'm sure those who are bitching that it was pointless are the same people who like to watch 10 minute long movie trailers that give away the whole plot.
I think if they had just called it a "teaser" there would be little to no argument.
I think if they had just called it a "teaser" there would be little to no argument.
more...
Haruhi
May 2, 06:03 AM
Those are great!!!!!!!! dont look ex tremely p0oprtable to me, but sitll. The early macbook :apple:
MarximusMG
Feb 12, 10:28 AM
Yes. Yes you are.
more...
Flynnstone
May 4, 09:58 PM
Updated!
??
Did you get it?
Pictures?
??
Did you get it?
Pictures?
zagato27
Oct 30, 09:51 PM
Don't think you could go wrong with this keyboard. As to comparing it to the AluBook????? I don't have one and my experience is limited to a few keystrokes at an Apple retailer. HOWEVER, it does seem to compare very nicely from my limited experience. Trust me, this is a nice keyboard especially if you are used to laptops. Finally, I think you might be in luck. I believe I did a Google search and came up with some European/Japanese sites that carried this and/or had some reviews of it. I could swear that in a review I came across some info that you could get a BT version of the IceKey. If they sold it here in the states I'd get one as my G5 is BT. My goal is to "cut the cord" so to speak. I highly recommend the Icekey.... good luck. Cheers
Did some digging and found an old review of the IceKey. Think that it will address your concerns regarding "feel". Check it out. http://www.insidemacgames.com/reviews/view.php?ID=359
Cheers
Did some digging and found an old review of the IceKey. Think that it will address your concerns regarding "feel". Check it out. http://www.insidemacgames.com/reviews/view.php?ID=359
Cheers
more...
Seasought
Nov 27, 05:47 PM
no and i have no idea how to do that. terminal is a bit intimidating.
im using Verizon DSL. Im connected to a wireless router.
Ok, just thought I'd ask. You can certainly experiment with it. Open Terminal and type ftp. Type the name of the server, your username and password and play around a bit. Type help once you get logged into your server and take a look at the put and mput commands (they're for uploading files). It's ugly, but it works and may be a good workaround until you resolve your GUI issues.
Just a thought, you can read up on how to use Terminal in help or online. I'll refrain of typing up some huge confusing instruction set on how to do it since it's not really your first choice here.
im using Verizon DSL. Im connected to a wireless router.
Ok, just thought I'd ask. You can certainly experiment with it. Open Terminal and type ftp. Type the name of the server, your username and password and play around a bit. Type help once you get logged into your server and take a look at the put and mput commands (they're for uploading files). It's ugly, but it works and may be a good workaround until you resolve your GUI issues.
Just a thought, you can read up on how to use Terminal in help or online. I'll refrain of typing up some huge confusing instruction set on how to do it since it's not really your first choice here.
d_and_n5000
Dec 21, 07:53 PM
Maybe you left something, like food, inside, and it is burning because of the heat. I've heard of horror stories at schools that use iBooks, where kids have papers and food instead of AirPort cards-scary. Have you left food in the AirPort slot?
more...
elVince
May 6, 04:26 AM
I dont think ill have a problem with the wires, myself personally, but in terms of designs i thought that it is comparable because of how the coolmaster isnt confined and it allows more air flow under the mbp. I've read stuff about how you can cool down a mbp even by raising it a half inch propped up against an eraser or something, so maybe thats where the coolmaster excels and because of the price difference, it really just basically comes down to which one does the job of cooling it down better.
wolrabn
May 1, 02:21 AM
Hi guys,
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
more...
Shackrat
Jun 30, 03:12 PM
Am I the only one who notices that photos taken on the iPhone 4 front camera look wonky in this app? For one, the rotation is opposite what the original photo was.
On the MobileMe gallery web page, IP4 front camera photos are rotated correctly, however the aspect ratio is way off making everything look fat.
On the MobileMe gallery web page, IP4 front camera photos are rotated correctly, however the aspect ratio is way off making everything look fat.
boogieman14
May 6, 11:24 AM
I put on order for the i7 and the 2Gig Video Card, would this machine handle somewhat serious gaming within 2 years time frame,
more...
SoftMango
Jan 26, 05:53 PM
Ok guys I just found this glitch within iREB to downgrade your ipod touch or iphone. I was trying to load up custom firmware to my ipod touch 2nd gen and I got stuck with a black screen, and I start to fiddle with itunes and ireb. Downgraded my 2nd generation ipod touch from 4.2.1 to 2.1.1 (the very first firmware for this model). Below ive put the instructions on how I did this. (Ive only tested this on my ipod, but it should work on anything that iREB can support.
iREB is not available for Mac users as of yet, will update if changes occur.
1)First you will need to change your hosts
Navigate to C:\Windows\System32\drivers\etc\ and locate “hosts” file.
Open this “hosts” file in Notepad and add this "74.208.105.171 gs.apple.com at the bottom of the note".
Credits to Komentra for the reply
2) Download iREB V4.0.x/4.1:
http://ih8sn0w.com/index.php/products/view/ireb.snow
3) Download the ipod firmware that you wish to downgrade to. (unless a new version of iREB is released, anything above 4.2.1 wont work. (I KNOW IT SAYS V4.0.x/4.1 BUT THATS PART OF THE GLITCH)
Download Firmware Here: http://www.felixbruns.de/iPod/firmware/
4) Plug in your iPod/iPhone and load up iREB.
5) Select your device from the menu.
6) Wait for iREB to put your device into its SPECIAL dfu mode. (not the normal one)
7) Now, open iTunes and wait for your iPod to come up, now heres where I was experimenting.
8) put your ipod into dfu mode (I know what your thinking "oh this guy is an idiot, he doesnt know what hes doing" well this where stuff gets interesting. You cant see whats going on the ipod but wait for those USB chimes so you will know what to press and when. - Hold both the power and home button at the same time untill you hear a usb sound from your computer. When that sound comes let go of the power button and keep holding the home button and wait for the second usb sound. -
9) Hold shift and click restore in itunes and find your old firmware (ie. 2.1.1)
10) AND YOUR DONE!
I know what your thinking again (im a mind reader) WHY WOULD YOU WANNA DO THIS? well for me, iOS 4.2.1 is a load of bull for me, it goes way too slow and jailbreaking it makes it even worse. and pretty much all I do on my ipod is listen to music and nothin else, no lies. Seriously, and if you need to downgrade for a practical reason, then why not.
This should work on any OLD firmware that is older then your current one. (again ive only tested this on 4.2.1)
Hope this helped.
SoftMango out.
Update For 1st & 2nd Generation devices
3.1.3 cannot be downgraded with this method. Here are the steps to solving this problem:
Download the following files:
Sn0wBreeze: http://www.mediafire.com/?2wt8v7yw1jlpnoc
Firmware 3.1.3: http://www.felixbruns.de/iPod/firmware/
1) Plug in your ipod touch/iphone
2) open sn0wbreeze and say ok to the release
3) go to the next step and browse the firmware (3.1.3)
4) On the next step click build ipsw
5) let the program create the custom firmware.
6) go to the next step and instructions will pop up showing you how to put your ipod into dfu mode.
7) follow the on screen steps and then your ipod will be put into a pwned state.
8) restore your ipod in itunes with the custom firmware that was made earlier.
9) Your Done!
I will be continually updating this thread when new stuff is out.
iREB is not available for Mac users as of yet, will update if changes occur.
1)First you will need to change your hosts
Navigate to C:\Windows\System32\drivers\etc\ and locate “hosts” file.
Open this “hosts” file in Notepad and add this "74.208.105.171 gs.apple.com at the bottom of the note".
Credits to Komentra for the reply
2) Download iREB V4.0.x/4.1:
http://ih8sn0w.com/index.php/products/view/ireb.snow
3) Download the ipod firmware that you wish to downgrade to. (unless a new version of iREB is released, anything above 4.2.1 wont work. (I KNOW IT SAYS V4.0.x/4.1 BUT THATS PART OF THE GLITCH)
Download Firmware Here: http://www.felixbruns.de/iPod/firmware/
4) Plug in your iPod/iPhone and load up iREB.
5) Select your device from the menu.
6) Wait for iREB to put your device into its SPECIAL dfu mode. (not the normal one)
7) Now, open iTunes and wait for your iPod to come up, now heres where I was experimenting.
8) put your ipod into dfu mode (I know what your thinking "oh this guy is an idiot, he doesnt know what hes doing" well this where stuff gets interesting. You cant see whats going on the ipod but wait for those USB chimes so you will know what to press and when. - Hold both the power and home button at the same time untill you hear a usb sound from your computer. When that sound comes let go of the power button and keep holding the home button and wait for the second usb sound. -
9) Hold shift and click restore in itunes and find your old firmware (ie. 2.1.1)
10) AND YOUR DONE!
I know what your thinking again (im a mind reader) WHY WOULD YOU WANNA DO THIS? well for me, iOS 4.2.1 is a load of bull for me, it goes way too slow and jailbreaking it makes it even worse. and pretty much all I do on my ipod is listen to music and nothin else, no lies. Seriously, and if you need to downgrade for a practical reason, then why not.
This should work on any OLD firmware that is older then your current one. (again ive only tested this on 4.2.1)
Hope this helped.
SoftMango out.
Update For 1st & 2nd Generation devices
3.1.3 cannot be downgraded with this method. Here are the steps to solving this problem:
Download the following files:
Sn0wBreeze: http://www.mediafire.com/?2wt8v7yw1jlpnoc
Firmware 3.1.3: http://www.felixbruns.de/iPod/firmware/
1) Plug in your ipod touch/iphone
2) open sn0wbreeze and say ok to the release
3) go to the next step and browse the firmware (3.1.3)
4) On the next step click build ipsw
5) let the program create the custom firmware.
6) go to the next step and instructions will pop up showing you how to put your ipod into dfu mode.
7) follow the on screen steps and then your ipod will be put into a pwned state.
8) restore your ipod in itunes with the custom firmware that was made earlier.
9) Your Done!
I will be continually updating this thread when new stuff is out.
aljawad
Dec 28, 12:51 PM
Flying in from Denmark, Europe to spend a week at MacWorld:cool:
See you on the 14th somewhere....
Hope to see you and the rest of our Cyber/Apple group of friends then - I'll be traveling from Kuwait to attend the event :)
See you on the 14th somewhere....
Hope to see you and the rest of our Cyber/Apple group of friends then - I'll be traveling from Kuwait to attend the event :)
more...
mtbdudex
Nov 3, 11:28 AM
can Aperture 3 directly create albums and/or add photos?
Island Dog
Sep 19, 09:11 PM
I have a Dell laptop now with a 30gb drive and have barely 5gb filled. I don't think having a 40gb in my iBook will be a big problem.
An external drive would be nice because I would like to share files between computers.
An external drive would be nice because I would like to share files between computers.
Abstract
Feb 23, 04:54 PM
Finish: To take pictures to the next level you have to do some post processing to make sure brightness, contrast, saturation and sharpness are all good. These images could all do with some work.
I agree 100% with the above. I don't think your photos are bad at all. I think they're good. They just don't have the same "pop" to them as pro photographer photos, and this probably has more to do with post-processing than it does anything else.
Admittedly, I don't do a lot of pp to my images either, and stick to what Lightroom 2.x can do for me. However, I still use it to touch up the contrast, play with the exposure and brightness, black level, and a few other things.
I agree 100% with the above. I don't think your photos are bad at all. I think they're good. They just don't have the same "pop" to them as pro photographer photos, and this probably has more to do with post-processing than it does anything else.
Admittedly, I don't do a lot of pp to my images either, and stick to what Lightroom 2.x can do for me. However, I still use it to touch up the contrast, play with the exposure and brightness, black level, and a few other things.
Johannesson
Apr 26, 10:49 AM
I bought two of these, one for me, one for my wife. In a random fashion, either the left ear or the right ear will "go deaf". Occasionally both ears will "go deaf". My wife's jack is so loose that it simply separates from the nano with the slightest movement! I get the same problems when I use my Bose earphones. The reason seems to be that the audio jack ports on this product have been manufactured without adequate attention to quality control. Short of returning the nanos, can you think of a solution?
treynolds
Nov 16, 02:57 PM
http://lh5.ggpht.com/_6s2PsZVD_fk/TOLvzVRl4nI/AAAAAAAACuA/ibJw-e7jLqU/s720/Screen%20Shot%203.jpg
Same thing, try to edit a post and the ad jumps to the middle of the edit area.
Same thing, try to edit a post and the ad jumps to the middle of the edit area.
maflynn
Feb 2, 09:53 AM
Yeh but ...... "every other sandy bridge computer is a 'PC' and Dell/HP appear to have more stock (sandy bridge) or in the process of ramping up production, when the news broke.
Yep and they'll have to right off that stock and/or get intel to cover the cost. The point is that this affects every computer maker. I'd not really single out one or two makers. What about Lenovo, they have sandy bridge computers, or Acer, Asus, or Gateway?
Yep and they'll have to right off that stock and/or get intel to cover the cost. The point is that this affects every computer maker. I'd not really single out one or two makers. What about Lenovo, they have sandy bridge computers, or Acer, Asus, or Gateway?
seubjoh
Mar 23, 12:14 PM
i do not unfortunately, how do i get this installed? is there a way without the disks?
SilvorX
Nov 20, 11:02 PM
welcome back to MR...all sites have trolls :(, but this site IS called macrumors so the trolls will have to deal with it...
0 comments:
Post a Comment